Procedure to install Dodocool DC39 Extender using Ap.setup

The Dodocool DC39 Extender Setup expands the range of your existing WiFi network while also giving up to 750Mbps of speed. It has internal antennae as well as larger amplifiers, allowing you to extend the network’s coverage throughout the house. The Dodocool DC39 increases WiFi performance across both frequency bands thanks to FastLane technology. It works with any regular router and is ideal for high-definition streaming and gaming.

You should download the WiFi Analytics application before you start configuring your WiFi repeater. With the help of the app, you can check the signal strength around the house. As a result, you can run across places with poor WiFi coverage. Launch the app after completing the Dodocool DC39 Extender Setup and test the wifi signal to see how much your WiFi coverage has improved since you started.

With that said, please see the steps for customising the Dodocool DC39 below without further ado. Let’s get this celebration started, shall we?

How to Install and Configure Dodocool DC39 Extender

You must go to the default Dodocool DC39 Extender online URL Ap.setup, which is accessible through a web browser, to install and configure a Dodocool DC39 Extender. Let’s take a quick look at the entire Dodocool DC39 installation procedure, which is described below:

Remove your Extender from the box.

To begin, double-check that your Dodocool DC39 Extender is properly unboxed. The front panel of your extender houses all of the LED lights, while the side panel houses the device’s buttons. The Dodocool DC39 Extender acts as a bridge between your current router and a WiFi device that is outside of your current router’s WiFi signal’s range.

Plug in the Dodocool DC39 and press the “Apply” Power button.

At this time, place the Dodocool DC39 Extender in a conspicuous location in your home. Concrete walls, microwaves, electric water tanks, treadmills, vacuum cleaners, mirrors, glassware, corners, air conditioning, and refrigerators are all products to avoid placing this item near. Connect the extender to an electrical outlet and turn it on once it has been properly installed. Additionally, always utilise a range extender with a working wall socket and a stable power source.

Connect your computer to a wireless network (Wi-Fi).

You’ll connect your repeater and a Wifi connection in the next stage. To connect to a WiFi network, select it and press the connect button. If your network is password-protected, you will be prompted for a password before being able to connect your repeater to it.

having Dodocool DC39  Installation Assistant access Make sure your PC or laptop is linked to a wireless network by turning it on. To begin, open your preferred web browser and navigate to the repeater login page. You must enter your login credentials in order to log in. After you’ve successfully logged in, the Dodocool DC39  installation assistant displays on your desktop.

Install and configure your Dodocool DC39 Extender .

On the manufacturer’s website, the installation assistance is referred to as the Dodocool DC39  smart installation wizard. Step-by-step instructions for setting up the Dodocool DC39 Extender are provided on the screen. All you have to do now is carefully follow their directions.

And that’s all there is to it! Your Dodocool DC39 WiFi booster has now been installed and configured successfully.

Locate the Most Appropriate Site

You can move your range extender to any location after it has been installed. Before proceeding, connect the extender and wait for the router indicator to activate. Make use of this LED light to figure out where your WiFi booster should be placed. Move it around until the Light appears in the green colour spectrum.

From this point on, connect all of your devices, including your PC, laptop, and smartphone, to the new enlarged wireless network.

Create a Dodocool DC39 extender configuration. After the Initial Setup,

You should now be able to make modifications to your Dodocool DC39 repeater’s setup. Change the settings on the Ap.setup page by navigating to the Ap.setup page and making the desired modifications. You may stop the SSID broadcast function, examine the devices currently connected to your network, create a hidden network, redesign the WiFi network name, set up an internal timetable, alter the WiFi speed, and do a range of other operations from the dashboard after logging in.

This finishes our detailed guide on installing and configuring the Dodocool DC39 Extender. Keep an eye out for more exciting developments like this one!

Leave a Reply